Skip to main content

windows enviroment variables

some wildcard path/ path enviroment variables





you can view env vars using set 

CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 126 Stepping 5, GenuineIntel
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PSModulePath=C:\Program Files\WindowsPowerShell\Modules;C:\Windows\system32\WindowsPowerShell\v1.0\Modules


 use variable with %var_name% 




run :: 



get serial no 

wmic bios get serialnumber



help of set 


a>set /?
Displays, sets, or removes cmd.exe environment variables.

SET [variable=[string]]

  variable  Specifies the environment-variable name.
  string    Specifies a series of characters to assign to the variable.

Type SET without parameters to display the current environment variables.

If Command Extensions are enabled SET changes as follows:

SET command invoked with just a variable name, no equal sign or value
will display the value of all variables whose prefix matches the name
given to the SET command.  For example:

    SET P

would display all variables that begin with the letter 'P'

SET command will set the ERRORLEVEL to 1 if the variable name is not
found in the current environment.

SET command will not allow an equal sign to be part of the name of
a variable.

Two new switches have been added to the SET command:

    SET /A expression
    SET /P variable=[promptString]

The /A switch specifies that the string to the right of the equal sign
is a numerical expression that is evaluated.  The expression evaluator
is pretty simple and supports the following operations, in decreasing
order of precedence:

    ()                  - grouping
    ! ~ -               - unary operators
    * / %               - arithmetic operators
    + -                 - arithmetic operators
    << >>               - logical shift
    &                   - bitwise and
    ^                   - bitwise exclusive or
    |                   - bitwise or
    = *= /= %= += -=    - assignment
      &= ^= |= <<= >>=
    ,                   - expression separator

If you use any of the logical or modulus operators, you will need to
enclose the expression string in quotes.  Any non-numeric strings in the
expression are treated as environment variable names whose values are
converted to numbers before using them.  If an environment variable name
is specified but is not defined in the current environment, then a value
of zero is used.  This allows you to do arithmetic with environment
variable values without having to type all those % signs to get their
values.  If SET /A is executed from the command line outside of a
command script, then it displays the final value of the expression.  The
assignment operator requires an environment variable name to the left of
the assignment operator.  Numeric values are decimal numbers, unless
prefixed by 0x for hexadecimal numbers, and 0 for octal numbers.
So 0x12 is the same as 18 is the same as 022. Please note that the octal
notation can be confusing: 08 and 09 are not valid numbers because 8 and
9 are not valid octal digits.

The /P switch allows you to set the value of a variable to a line of input
entered by the user.  Displays the specified promptString before reading
the line of input.  The promptString can be empty.

Environment variable substitution has been enhanced as follows:


would expand the PATH environment variable, substituting each occurrence
of "str1" in the expanded result with "str2".  "str2" can be the empty
string to effectively delete all occurrences of "str1" from the expanded
output.  "str1" can begin with an asterisk, in which case it will match
everything from the beginning of the expanded output to the first
occurrence of the remaining portion of str1.

May also specify substrings for an expansion.


would expand the PATH environment variable, and then use only the 5
characters that begin at the 11th (offset 10) character of the expanded
result.  If the length is not specified, then it defaults to the
remainder of the variable value.  If either number (offset or length) is
negative, then the number used is the length of the environment variable
value added to the offset or length specified.


would extract the last 10 characters of the PATH variable.


would extract all but the last 2 characters of the PATH variable.

Finally, support for delayed environment variable expansion has been
added.  This support is always disabled by default, but may be
enabled/disabled via the /V command line switch to CMD.EXE.  See CMD /?

Delayed environment variable expansion is useful for getting around
the limitations of the current expansion which happens when a line
of text is read, not when it is executed.  The following example
demonstrates the problem with immediate variable expansion:

    set VAR=before
    if "%VAR%" == "before" (
        set VAR=after
        if "%VAR%" == "after" @echo If you see this, it worked

would never display the message, since the %VAR% in BOTH IF statements
is substituted when the first IF statement is read, since it logically
includes the body of the IF, which is a compound statement.  So the
IF inside the compound statement is really comparing "before" with
"after" which will never be equal.  Similarly, the following example
will not work as expected:

    set LIST=
    for %i in (*) do set LIST=%LIST% %i
    echo %LIST%

in that it will NOT build up a list of files in the current directory,
but instead will just set the LIST variable to the last file found.
Again, this is because the %LIST% is expanded just once when the
FOR statement is read, and at that time the LIST variable is empty.
So the actual FOR loop we are executing is:

    for %i in (*) do set LIST= %i

which just keeps setting LIST to the last file found.

Delayed environment variable expansion allows you to use a different
character (the exclamation mark) to expand environment variables at
execution time.  If delayed variable expansion is enabled, the above
examples could be written as follows to work as intended:

    set VAR=before
    if "%VAR%" == "before" (
        set VAR=after
        if "!VAR!" == "after" @echo If you see this, it worked

    set LIST=
    for %i in (*) do set LIST=!LIST! %i
    echo %LIST%

If Command Extensions are enabled, then there are several dynamic
environment variables that can be expanded but which don't show up in
the list of variables displayed by SET.  These variable values are
computed dynamically each time the value of the variable is expanded.
If the user explicitly defines a variable with one of these names, then
that definition will override the dynamic one described below:

%CD% - expands to the current directory string.

%DATE% - expands to current date using same format as DATE command.

%TIME% - expands to current time using same format as TIME command.

%RANDOM% - expands to a random decimal number between 0 and 32767.

%ERRORLEVEL% - expands to the current ERRORLEVEL value

%CMDEXTVERSION% - expands to the current Command Processor Extensions
    version number.

%CMDCMDLINE% - expands to the original command line that invoked the
    Command Processor.

%HIGHESTNUMANODENUMBER% - expands to the highest NUMA node number
    on this machine. 


Popular posts from this blog

sxhkd volume andbrightness config for dwm on void

xbps-install  sxhkd ------------ mkdir .config/sxhkd cd .config/sxhkd nano/vim sxhkdrc -------------------------------- XF86AudioRaiseVolume         amixer -c 1 -- sset Master 2db+ XF86AudioLowerVolume         amixer -c 1 -- sset Master 2db- XF86AudioMute         amixer -c 1 -- sset Master toggle alt + shift + Escape         pkill -USR1 -x sxhkd XF86MonBrightnessUp          xbacklight -inc 20 XF86MonBrightnessDown          xbacklight -dec 20 ------------------------------------------------------------- amixer -c card_no -- sset Interface volume run alsamixer to find card no and interface names xbps-install -S git git clone xbps-install -S base-devel libX11-devel libXft-devel libXinerama-devel  vim # FREETYPEINC = ${X11INC}/freetype2 #comment for non-bsd make clean install   cp config.def.h config.h vim config.h xbps-install -S font-symbola #for emoji on statusbar support     void audio config xbps-i

Hidden Wiki

Welcome to The Hidden Wiki New hidden wiki url 2015 http://zqktlwi4fecvo6ri.onion Add it to bookmarks and spread it!!! Editor's picks Bored? Pick a random page from the article index and replace one of these slots with it. The Matrix - Very nice to read. How to Exit the Matrix - Learn how to Protect yourself and your rights, online and off. Verifying PGP signatures - A short and simple how-to guide. In Praise Of Hawala - Anonymous informal value transfer system. Volunteer Here are five different things that you can help us out with. Plunder other hidden service lists for links and place them here! File the SnapBBSIndex links wherever they go. Set external links to HTTPS where available, good certificate, and same content. Care to start recording onionland's history? Check out Onionland's Museum Perform Dead Services Duties. Introduction Points - Clearnet search engine for Tor Hidden Services (allows you

fix idm integration on chrome

Chrome Browser Integration I do not see IDM extension in Chrome extensions list. How can I install it?  How to configure IDM extension for Chrome? Please note that all IDM extensions that can be found in Google Store are fake and should not be used. You need to install IDM extension manually from IDM installation folder. Read in step 2 how to do it . 1. Please update IDM to the latest version by using  "IDM Help->Check for updates..."  menu item 2.  I don't see  "IDM Integration module"  extension in the list of extensions in  Chrome . How can I install it? Press on  Chrome  menu ( arrow 1  on the image), select  "Settings"  menu item ( arrow 2  on the image) and then select  "Extensions"  tab ( arrow 3  on the image). After this open IDM installation folder ( "C:\Program Files (x86)\Internet Download Manager"  by default,  arrow 4  on the image) and drag and drop  "IDMGCExt.crx"  ( arrow 5  on the image) file int